Product Finder
... Products

Thermal Protector N01

Power class: 1,6 A to 7,5 A
Type series: 01

  • normally closed
  • resets automatically
  • with a connection wire
  • partially insulated in a plastic cap
Download datasheet
Thermal Protector N01
Thermal Protector N01
Thermal Protector N01
Thermal Protector N01

The switchgear of type series 01 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and a contact cap which is made of steel (2) and insulated from it, plus an integrated stationary silver contact (6) which closes the housing like a button cell. At the same time, the spring snap-in disc (3) which forms the current transfer element bears the movable contact (4) and discharges the flow of current and self-heating from the bimetallic disc (5) by exercising consistent, steady contact pressure. The bimetallic disc (5) is held on the one movable contact (4) which sticks out through this without having to be welded or fixed. As such, it can continually work (exposed) and only reacts to the ambient temperature in the device to be protected. When the rated switching temperature is reached, the bimetallic disc (5) snaps into its inverted position and pushes the spring snap-in disc (3) downwards. The contact is abruptly opened and the temperature rise of the device to be protected is disrupted. If the ambient temperature now falls, the bimetallic disc (5) snaps back into its start position when reaching the defined reset temperature and the contact is closed again.

Technical specifications

Nominal switching temperature (NST) in 5°C
60 °C - 200 °C
Tolerance (standard)
±2.5 K / ±5 K
Reverse switch temperature (RST)
UL
≥ 35 °C (≤ 80°C NST)
-35 K ± 15 K (≥ 85°C ≤ 180° C NST)
-65 K ± 15 K (≥ 185° C ≤ 200° C NST)
VDE
≥ 35 °C
(defined reset temperature possible on customer request)
Installation height from
3.4 mm
Diameter
10.0 mm
Length of connection Pins
14.0 mm / 20.0 mm
Resistance to impregnation
suitable
Suitable for installation in protection class
I
Pressure resistance to the switch housing
450 N
Standard connection
wire with d = 0.5 mm/ AWG22
Operating voltage range AC / DC
up until 500 V AC / 14 V DC
Rated voltage AC
250 V (VDE) 277 V (UL)
Rated current AC cos ϕ = 1.0 / cycles
2.5 A / 10,000
Rated current AC cos ϕ = 0.6 / cycles
1.6 A / 10,000
Rated current AC cos ϕ = 0.4 / cycles
1.8 A / 10,000
Max. switching current AC cos ϕ = 1.0 / cycles
6.3 A / 3,000
Max. switching current AC cos ϕ = 1.0 / cycles
7.5 A / 300
Max. switching current AC cos ϕ = 0.4 / cycles
7.2 A / 1,000
Rated voltage DC
12.0 V
Max. switching current DC / cycles
40.0 A / 5,000
Total bounce time
< 1 ms
Contact resistance (according to MIL-STD. R5757)
≤ 50 mΩ
Vibration resistance at 10 ... 60 Hz
100 m/s²

Approbation

CQC CSA UL VDE ENEC IEC
Icon Close
ContactContact
Sales
+49 (0) 3632 5412-110
Headquarter
+49 3632 5412-0
Go to top To the top