CR6

Power class: 4 A to 25 A
Series: R6

  • normally closed
  • does not reset automatically
  • voltage applied
  • with connector cables
  • with epoxy
  • without insulation
Download Datasheet
Thermal protectors CR6Thermal protectors CR6Thermal protectors CR6

Technical specifications

Nominal switching temperature (NST) in 5 °C 70 °C - 180 °C
Tolerance NST ≤ 140 °C ±5K
Tolerance NST > 140 °C ±10K
Reverse switch temperature (RST) below NST UL ≥ 35 °C
Reverse switch temperature (RST) below NST VDE ≥ 35 °C
Installation height from 6.6 mm
Diameter 9.0 mm
Resistance to impregnation suitable
Suitable for installation in protection class I
Pressure resistance to the switch housing600 N
Standard connectionLead wire 0.75 mm² / AWG18
Operational voltage range AC/DCup until 250 V AC
Rated voltage AC120 V / 230 V (VDE) 250 V (UL)
Rated current AC cos ϕ = 1.0/cycles10.0 A / 1,000
Rated current AC cos ϕ = 0.6/cycles6.3 A / 1,000
Max. switching current AC cos ϕ = 1.0/cycles25.0 A / 1,000
Total bounce time< 1 ms
Contact resistance (according to MIL-STD. R5757)≤ 50 mΩ
Vibration resistance at 10 ... 60 Hz100 m/s²

Approbation

IECENECVDEULCSACQC
Go to Top To the top